Home Products EV Charger AC EV Wallbox with T2S Socket
  • 4
  • 3
  • 2
  • 1
  • 4
  • 3
  • 2
  • 1

AC EV Wallbox with T2S Socket

BENY Electric Smart EV Wallbox Type 2 Socket with Shutter in Accordance with IEC 62196-2

Highlights :

  • 1-Phase from 1.3kW to 7.4kW
  • 3-Phase from 4.1kW to 22kW
  • lP66
  • Type 2 Socket with Shutter
  • Dynamic Load Balancing (optional)
  • Open Charge Point Protocol (optional)
  • Customize All Types of Connectors
  • Smart Version with APP (optional)
  • 3 Years Warranty
  • rohs
  • CE-Certified icon
  • CB icon
  • RCM icon
  • ocpp 1 6 icon
  • wallbox ev beny

A MODE 3 (IEC61851-1) FAST EV CHARGER FOR RESIDENTIAL USE

BENY BCPM Series EV chargers have an lP66 patented design case for outdoor and indoor use.

 

The type 2 socket with shutter in accordance with IEC 62196-2, makes it highly flexible and compatible with all electric vehicles.

  • BENY DLB
  • BENY Electric DLB box 1

Dynamic Load Balancing Function

To safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way.

 

DLB (Dynamic Load Balancing) is available in the BENY BCP series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.

  • 1000X550 2

PEN FAULT DETECTION

Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor.

 

If the user uses an EV charger equipped with PEN protection, its internal design has a contactor to cut off the ground, once the PEN line is cut off, the contactor KM1 and KM2 are immediately and automatically disconnected, there is only a weak leakage current between CP and PE to L line, its current value is less than 1mA, which is the smallest perceived leakage current of the human body, people can disengage themselves, no safety risks.

  • EV charger APP

SMART APP FOR OPTION

BENY EV chargers can be controlled by a smart APP via WIFI or Bluetooth connection:

 

✔ One to one binding EV charger by resetting the password, prevent the EV charger being stolen;

 

✔ View charging data and status;

 

✔ Set up various charging configurations, charging current, DLB mode, etc.

 

✔ Scheduled charging;

 

✔ Firmware update;

FEATURES/ADVANTAGES

  • 1000x500 1
  • IP65 4

RFID card to charge automatically

 

Type 2 socket with shutter in accordance with IEC 62196-2

 

  • Built-in Type B RCD for Leakage Protection
  • Over Temperature Sensor
  • Clip-on Grid Current Sensor
  • LED Ring Status Indication
  • With Emergency Stop Switch

SPECIFICATION

Electrical
Charging capacity 1.3kW-7.4kW / 4.1kW-22kW
Charge mode Mode 3 (IEC 61851-1)
Output power Selectable 1-phase or 3-phase, 230-400V, 6 A to 32 A, 50-60 Hz
Socket Type Type 2 Socket with Shutter
Protection and certification
Build-in RCD TYPE A + DC6mA leakage sensor built-in
Socket IP66, IK10
Housing fire ratings V0
Operating temperature -25 – +55℃
Compliance IEC61851-1, IEC61851-21-2,IEC61000-4,CE EMC EU/2014,CE Low Voltage EU/2014/35
Certificate CE
Connectivity
Authorization Auto-start standard / RFID card option
Status indication LED ring
WLAN communication Wi-Fi / Bluetooth 4.2 option
Mechanical
Housing Iron
Dimension W278 x H360 x D152 mm
Mounting Wall or Pole

 

Talk to Our Expert